Etude de la reaction de lactonisation de l'acide ethylenedioxy-1,1 methyl-2 oxo-3 cyclopentane-2- propionique

The lactonisation of ethylene 1,1-dioxy 2-methyl 3-oxo cyclopentane-2 propionic acid has been affected by a new method whose mechanism is discussed. The formation of a β-diketone and other products by isomerisation of the enol lactone has been avoided. The enol lactone is an important intermediate in the total synthesis of steroids and has been prepared with a good yield by the new method.     

Spectrophotometric, EPR and kinetic characterisation of the >N-O* radical from 1-hydroxybenzotriazole, a key reactive species in mediated enzymatic oxidations

Characterisation of the aminoxyl (>N-O*) radical BTNO, generated from 1-hydroxybenzotriazole (HBT) by the one-electron oxidant CAN (a Ce(IV) salt), confirms BTNO as the reactive intermediate in oxidations run with the laccase/HBT system.     

A pilot study for the preparation of a new Reference Material based on antarctic krill

The preparation of new Certified Reference Materials (CRMs) of antarctic matrices forms the backbone of an ongoing project in the framework of the Italian National Program for Antarctic Research. The first CRM of this kind (MURST-ISS-A1 Antarctic Marine Sediment) is already available. The second phase focuses on the certification of antarctic krill, a small shrimp extremely abundant in the Southern Ocean. The total mass of krill available for this purpose is approximately 44 kg and results from the combination of three different catches (Ross Sea, Marguerite Bay and Livingston Island, respectively). The quantification of the following elements in the raw mass appears to be affordable by current analytical techniques, values being in the range of (in μg/g) 0.11–0.30 for As, 0.03–0.12 for Cd, 0.06–0.23 for Cr, 6.1–21 for Cu, 5.7–7.6 for Fe, 0.005–0.008 for Hg, 0.7–1.2 for Mn, 0.013– 0.077 for Ni, 0.04–0.57 for Pb and 12–16 for Zn. On the other hand, the average values ascertained in freeze-dried krill are as a rule one order of magnitude higher, i.e., (in μg/g), 3.2 for As, 0.6 for Cd, 1.8 for Cr, 75 for Cu, 61 for Fe, 0.025 for Hg, 4.6 for Mn, 0.7 for Ni, 2.1 for Pb and 81 for Zn. Information on the pretreatment of krill and details on the planned certification campaign are also given. Received: 10 June 1997 / Revised: 24 September 1997 / Accepted: 28 September 1997     

Zn(II) coordination to polyamine macrocycles containing dipyridine units. New insights into the activity of dinuclear Zn(II) complexes in phosphate ester hydrolysis

Zn(II) binding by the dipyridine-containing macrocycles L1-L3 has been analyzed by means of potentiometric measurements in aqueous solutions. These ligands contain one (L1, L2) or two (L3) 2,2'-dipyridine units as an integral part of a polyamine macrocyclic framework having different dimensions and numbers of nitrogen donors. Depending on the number of donors, L1-L3 can form stable mono- and/or dinuclear Zn(II) complexes in a wide pH range. Facile deprotonation of Zn(II)-coordinated water molecules gives mono- and dihydroxo-complexes from neutral to alkaline pH values. The ability of these complexes as nucleophilic agents in hydrolytic processes has been tested by using bis(p-nitrophenyl) phosphate (BNPP) as a substrate. In the dinuclear complexes the two metals play a cooperative role in BNPP cleavage. In the case of the L2 dinuclear complex [Zn(2)L2(OH)(2)](2+), the two metals act cooperatively through a hydrolytic process involving a bridging interaction of the substrate with the two Zn(II) ions and a simultaneous nucleophilic attack of a Zn-OH function at phosphorus; in the case of the dizinc complex with the largest macrocycle L3, only the monohydroxo complex [Zn(2)L3(OH)](3+) promotes BNPP hydrolysis. BNPP interacts with a single metal, while the hydroxide anion may operate a nucleophilic attack. Both complexes display high rate enhancements in BNPP cleavage with respect to previously reported dizinc complexes, due to hydrophobic and pi-stacking interactions between the nitrophenyl groups of BNPP and the dipyridine units of the complexes.     

Microstructured cocultures of cardiac myocytes and fibroblasts: a two-dimensional in vitro model of cardiac tissue.

Cardiac myocytes and fibroblasts are essential elements of myocardial tissue structure and function. In vivo, myocytes constitute the majority of cardiac tissue volume, whereas fibroblasts dominate in numbers. In vitro, cardiac cell cultures are usually designed to exclude fibroblasts, which, because of their maintained proliferative potential, tend to overgrow the myocytes. Recent advances in microstructuring of cultures and cell growth on elastic membranes have greatly enhanced in vitro preservation of tissue properties and offer a novel platform technology for producing more in vivo-like models of myocardium. We used microfluidic techniques to grow two-dimensional structured cardiac tissue models, containing both myocytes and fibroblasts, and characterized cell morphology, distribution, and coupling using immunohistochemical techniques. In vitro findings were compared with in vivo ventricular cyto-architecture. Cardiac myocytes and fibroblasts, cultured on intersecting 30-microm-wide collagen tracks, acquire an in vivo-like phenotype. Their spatial arrangement closely resembles that observed in native tissue: Strands of highly aligned myocytes are surrounded by parallel threads of fibroblasts. In this in vitro system, fibroblasts form contacts with other fibroblasts and myocytes, which can support homogeneous and heterogeneous gap junctional coupling, as observed in vivo. We conclude that structured cocultures of cardiomyocytes and fibroblasts mimic in vivo ventricular tissue organization and provide a novel tool for in vitro research into cardiac electromechanical function.     

Sensitivity improvement in 19F NMR-based screening experiments: theoretical considerations and experimental applications

NMR-based binding and functional screening performed with FAXS (fluorine chemical shift anisotropy and exchange for screening) and 3-FABS (three fluorine atoms for biochemical screening) represents a potential alternative approach to high-throughput screening for the identification of novel potential drug candidates. The major limitation of this method in its current status is its intrinsic low sensitivity that limits the number of tested compounds. One approach for overcoming this problem is the use of a cryogenically cooled (19)F probe that reduces the thermal noise in the receiver circuitry. Sensitivity improvement in the two screening techniques achieved with the novel cryogenic (19)F probe technology permits an increased throughput, detection of weaker binders and inhibitors (relevant in a fragment-based lead discovery program), detection of slow binders, and reduction in protein and substrate consumption. These aspects are analyzed with theoretical simulations and experimental quantitative performance evaluation. Application of 3-FABS combined with the cryogenic (19)F probe technology to rapid screening at very low enzyme concentrations and the current detection limits reached with this approach are also presented.     

Identification and mass spectrometric characterization of glycosylated flavonoids in Triticum durum plants by high-performance liquid chromatography with tandem mass spectrometry

A mass spectrometric method for extensive detection and semi-quantitative determination of flavonoid glycosides in stem and leaves of young Triticum durum plants is presented. About 100 g of sample were lyophilized and ground, and the compounds of interest were then extracted, cleaned-up, and fractionated using high-performance liquid chromatography (HPLC). Tandem mass spectrometry analyses were performed using a quadrupole-linear ion trap instrument with an information-dependent data acquisition (IDA) protocol that looped two experiments, enhanced MS scan and enhanced product ion scan. Various glycoconjugates, which are all derivatives of only four flavones, apigenin, luteolin, chrysoeriol and tricin, were identified and belong to the following categories: 7 monoglycosides, 31 diglycosides, 15 triglycosides and 1 tetraglycoside. Among these some acylated glycosides were found. Tricin derivatives are present exclusively as O-glycosides, while apigenin and luteolin are present always as C-glycosides. Semi-quantitative estimation was performed by using the monoglycoside and diglycoside of quercetin as internal standards.     

Environmentally degradable bio-based polymeric blends and composites

Blends and composites based on environmentally degradable-ecocompatible synthetic and natural polymeric materials and fillers of natural origin have been prepared and processed under different conditions. Poly(vinyl alcohol) (PVA) was used as the synthetic polymer of choice by virtue of its capability to be processed from water solution or suspension as well as from the melt by blow extrusion and injection molding. Starch and gelatin were taken as the polymeric materials from renewable resources. The fillers were all of natural origin, as waste from food and agro-industry consisted of sugar cane bagasse (SCB), wheat flour (WF), orange peels (OR), apple peels (AP), corn fibres (CF), saw dust (SD) and wheat straw (WS). All the natural or hybrid formulations were intended to be utilized for the production of: a) Environmentally degradable mulching films (hydro-biomulching) displaying, in some cases, self-fertilizing characteristics by in situ spraying of water solutions or suspensions; b) Laminates and containers to be used in agriculture and food packaging by compression and injection molding followed by baking. Some typical prototype items have been prepared and characterized in relation to their morphological and mechanical properties and tested with different methodology for their propensity to environmental degradation and biodegradation as ultimate stage of their service life. A relationship between chemical composition and mechanical properties and propensity to biodegradation has been discussed in a few representative cases.     

Influence of inhibitory compounds and minor sugars on xylitol production by <Emphasis Type="Italic">Debaryomyces hansenii</Emphasis>

To obtain in-depth information on the overall metabolic behavior of the new good xylitol producer Debaryomyces hansenii UFV-170, batch bioconversions were carried out using semisynthetic media with compositions simulating those of typical acidic hemicellulose hydrolysates of sugarcane bagasse. For this purpose, we used media containing glucose (4.3–6.5 g/L), xylose (60.1–92.1 g/L), or arabinose (5.9–9.2 g/L), or binary or ternary mixtures of them in either the presence or absence of typical inhibitors of acidic hydrolysates, such as furfural (1.0–5.0 g/L), hydroxymethylfurfural (0.01–0.30 g/L), acetic acid (0.5–3.0 g/L), and vanillin (0.5–3.0 g/L). D. hansenii exhibited a good tolerance to high sugar concentrations as well as to the presence of inhibiting compounds in the fermentation media. It was able to produce xylitol only from xylose, arabitol from arabinose, and no glucitol from glucose. Arabinose metabolization was incomplete, while ethanol was mainly produced from glucose and, to a lesser less extent, from xylose and arabinose. The results suggest potential application of this strain in xyloseto-xylitol bioconversion from complex xylose media from lignocellulosic materials.     

Gamma-radiolysis of quinoline in 2-propanol solution

In the last twenty years the ionizing effects on matter of⁶⁰Co γ-rays have been widely discussed. However, regarding organic compounds, mainly aromatic ones, results are scarce, particularly those obtained in alcoholic solution. γ-Radiation is used mainly in industry and medicine, particularly for sterilization of surgical materials. In this work we studied the chemical and radiolytic stability of products by radiation from quinoline in isopropanol solution. Doses were from 2×10⁴ to 3×10⁵ Gy and the samples concentration was 1∶1 by volume. We have observed significant effects for high radiation doses. Lower doses effected the solvent with the production of long polymeric hydrocarbons. Products formed were characterized by capillary gas chromatography coupled to a mass-selective detector (GC/MSD). We have used a fused silica capillary column 25 m long, 0.2 mm in internal diameter, covered by a 0.33 μm thick film of crosslinked 5% phenyl methyl silicone.